Water Works Heavy Duty Degreaser Concentrate Certified Compliance List
Water Works Heavy Duty Degreaser Concentrate Certified Compliance List
| Test Compliance | Description | Dilution | Materials Tested |
|---|---|---|---|
| Boeing D6-17487 Rev. P | Exterior and General Cleaners and Liquid Waxes, Polishes and Polishing Compounds | Full Strength & 1:9 | Sandwich Corrosion Test, Acrylic Cracking Test, Paint Softening Test, Hydrogen Embrittlement Test |
| Douglas Aircraft Company Customer Service Document CSD No. 1 | Materials and Procedures for General Exterior Cleaning of Painted and Unpainted Surfaces (General Purpose Cleaner) | Full Strength & 1:9 | Effect on Painted Surfaces, Residue, Sandwich Corrosion, Stress Crazing Test on Acrylic Plastics, Immersion Corrosion, Aluminum Removal, Hydrogen Embrittlement |
| AMS 155C | Cleaner for Exterior Surfaces Water-Miscible, Pressure-Spraying Type | Full Strength & 1:9 | Total Immersion Corrosion, Low-Embrittling Cadmium Plate, Hydrogen Embrittlement, Flash Point |
| ARP 1755B | Effect of Cleaning Agents on Aircraft Engine Materials. Stock Loss Test Method. Category 10: Aqueous Cleaner | 1:1 | Effect on Transparent Acrylic Plastics, Effect on Painted Surfaces, Effect on Unpainted Surfaces |
| ASTM F 483 | Standard Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals | 2:1 | AMS 4043 (4292 Magnesium) |
| ASTM F 519 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments | 1:9 | Type 1a1, low-embrittling cadmium plated in accordance with MIL-STD-870 Type I Class 1 |
| Pratt & Whitney PWA 36604 Rev. D | Compatibility with PWA 407 Rubber | 1:1 | ASTM D 816 Method B, Type 1 |
| Pratt & Whitney PWA 36604 Rev. D | Stress Corrosion | 1:9 | ASTM F 945, Method A using AMS 4916 |
| Pratt & Whitney PWA 36604 Rev. D | Hot Corrosion | 1:1 | AMS 5544 (Wasploly), AMS 5536 (Hastelloy X), AMS 5608 (Haynes 188), AMS 5580 (Inconel 625), AMS 6360 (4340 Steel), AMS 407 (2024-T3 Aluminum), AMS 4375 (AZ31B-H36 Magnesium) |
| Industry Approval | Description | Dilution | Test Method | Materials Tested |
|---|---|---|---|---|
| Honeywell (Allied Signal) EMS 53170 | Material Requirements for Aqueous and Semi-aqueous Degreasing | 1:1 | Appendix A. Etch Rate Test Method | Bare Aluminum (2024-T6), Magnesium (AZ31), Bare low alloy steel (4130), Cadmium Plated steel (QQ-P-416 Type II), Titanium 6-4, Nickel based alloy (INCONEL625), Ferrous alloy A286, Stainless steel alloy (410 SS) |
| 2:1 | Appendix B. Sandwich Corrosion Test Method (ASTM F 1110) | 7075-T6, 2024-T3, 7075-T6 (MIL-A-8625 Type II, Class 1), 2024-T3 (MIL-A-8625 Type II, Class 1) | ||
| 1:1 | Appendix C. Intergranular Attack Test Method | Bare Aluminum (2024-T6), Magnesium (AZ31), Bare low alloy steel (4130), Cadmium Plated steel (QQ-P-416 Type II), Titanium 6-4, Nickel based alloy (INCONEL625), Ferrous alloy A286, Stainless steel alloy (410 SS) | ||
| 1:1 | Appendix F. Hydrogen Embrittlement Test Method (ASTM F519) | Unplated, notched tensile bars from AISI 4340 per ASTM F519, Type 1a. | ||
| 1:1 | Appendix G. Stress Corrosion and Hydrogen Pickup Test Method (ASTM F 945) | AMS 4911, AMS 4916 | ||
| Honeywell Standard Practices Manual | Approved Engine Cleaner SPM 70-00-02 for TS3 Engine Component Parts | |||
| United Airlines Administrative / Technical Manual AC Appearance-UAL | Aircraft Exterior Wash Program | |||
| American Airlines Administrative / Technical Manual AC Appearance | UAL / Aircraft Exterior Wash Program |
Conforms to Nuclear Power Parts Cleaning Compatibility Test:
Category Code C1 – C Compound for use on all surfaces in inedible product areas, non-processing aSulfur wt% < 0.005, Zinc PPM < 10, Antimony PPM < 5, Bismuth PPM < 16, Lead PPM < 5, Tin PPM < 5, Cadmium PPM < 0.2reas, and/or exterior areas. Registration Number 141454.
South Coast Air Quality Management District: Certified as a Clean Air Solvent
Compliant with SCAQMD 5 gm/liter when in dilutions of 2:1 or higher
Certification & description
Green Seal – GS-34: Environmental Standard for Cleaning and Degreasing Agents
The performance requirements for Green Seal GS 34 have been met. The process soil was successfully cleaned at a 33% dilution using immersion cleaning, the maintenance soil cleaning when using ultrasonic energy at a 12.5% dilution of the product, and the oil separation was successful when using the 12.5% dilution at room temperature.
| Test Compliance | Description | Dilution | Materials Tested |
|---|---|---|---|
| ASTM G-122 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents | 33% | 304 Stainless Steel Coupon |
| MIL-PRF87937C | Cleaning Compounds, Aerospace Equipment | 33% | 304 Stainless Steel Coupon |
| MIL-C-29602 | Cleaning Compounds, for Parts Washers and Spray Cabinets | 33% | 304 Stainless Steel Coupon |
Evaluated with the Irritation Assay System in order to predict its potential for ocular and dermal irritation. The ocular results indicated that the sample of Heavy Duty Degreaser is a mild ocular irritant. The dermal results demonstrated that the sample is a dermal non-irritant.
Aquatic Biodegradability in accordance with ISO 9439.
* “This product meets the Green Seal™ Standard for Cleaning and Degreasing Agents, GS-34, based on its reduced hazard to humans, reduced aquatic impacts, reduced smog production, and low ozone depletion potential”
Category Code C1 – C Compound for use on all surfaces in inedible product areas, non-processing areas, and/or exterior areas. Registration Number 141454.